Produk
Sinyal Amplifier M830X Kanggo Loadcell
Sinyal Amplifier M830X
-Kenapa amplifier?
Umume model sel beban SRI duwe sawetara millivolt output voltase sithik (kajaba AMP utawa DIGITAL dilambangake).Yen PLC utawa sistem akuisisi data (DAQ) mbutuhake sinyal analog sing digedhekake (yaiku: 0-10V), sampeyan butuh amplifier kanggo jembatan pengukur galur.Penguat SRI (M830X) nyedhiyakake voltase eksitasi menyang sirkuit strain gage, ngowahi output analog saka mv / V dadi V / V, supaya sinyal sing digedhekake bisa digunakake karo PLC, DAQ, komputer, utawa mikroprosesor.
-Carane amplifier M830X karo sel mbukak?
Nalika sel mbukak lan M830X dituku bebarengan, dipasang kabel (kabel tameng plus konektor) saka sel mbukak kanggo M830X klebu.Kabel sing dilindhungi saka amplifier menyang DAQ pangguna uga kalebu.Elinga yen sumber daya DC (12-24V) ora klebu.
-Spesifikasi amplifier lan manual.
Lembar spesifikasi.pdf
M8301 Manual.pdf
-Perlu output digital tinimbang output analog?
Yen sampeyan butuh sistem akuisisi data, utawa output digital menyang komputer, deleng kothak antarmuka M812X utawa papan sirkuit OEM M8123X.
-Carane milih amplifier sing tepat kanggo sel beban?
Gunakake grafik ing ngisor iki kanggo milih output lan konektor sing bisa digunakake karo sistem sampeyan.
Amplifier M830X Kab
| Model | Sinyal Diferensial | Sinyal siji-rampung | Konektor |
| M8301A | ± 10V (mode umum 0) | N/A | HIROSE |
| M8301B | ± 5V (mode umum 0) | N/A | HIROSE |
| M8301C | N/A | + Sinyal ± 5V,-Sinyal 0V | HIROSE |
| M8301F | N/A | +Sinyal 0～10V,-Sinyal 5V | HIROSE |
| M8301G | N/A | + Sinyal 0～5V,-Sinyal 2.5V | HIROSE |
| M8301H | N/A | + Sinyal ± 10V,-Sinyal 0V | HIROSE |
| M8302A | ± 10V (mode umum 0) | N/A | Open Ended |
| M8302C | N/A | + Sinyal 0～5V,-Sinyal 2.5V | Open Ended |
| M8302D | ± 5V (mode umum 0) | N/A | Open Ended |
| M8302E | N/A | + Sinyal ± 5V,-Sinyal 0V | Open Ended |
| M8302H | ± 1.5V (mode umum 0) | N/A | Open Ended |
